13.3inch e-Paper e-Ink Display HAT For Raspberry Pi 1600×1200 16 Grey Scales

13.3inch e-Paper E-Ink Display HAT for Raspberry Pi, 1600×1200 pixels, Black / White, 2-16 Grey Scales, USB/SPI/I80. Partial refresh support, low power, wide viewing angle, paper-like effect. Ideal for e-reader, eink monitor, industrial instruments.. No backlight, keeps displaying last content for a long time even when power down.

Ultra low power consumption, basically power is only required for refreshing. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. USB/SPI/I80 interface, for connecting with controller boards like Raspberry Pi/STM32, etc. Comes with development resources and manual (examples for Raspberry Pi/STM32). 285.80 × 213.65mm.

270.40 × 202.80mm. 0.169 × 0.169mm. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO header. Compatible with Raspberry Pi series boards. Raspberry Pi in the photo is NOT included. For use with controller boards like Raspberry Pi/STM32. SPI chip selection, low active.

Busy status output, low active. Suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags.. Resources for different product may vary, please check the wiki page to confirm the actually provided resources. 21.76 × 14.00. 42.0 × 27.0.

27.60 × 27.60. 48.0 × 33.0.

1.54inch e-Paper Module (B). 1.54inch e-Paper Module (C). 27.51 × 27.51.

48.55 × 23.71. 65.0 × 30.2.

2.13inch e-Paper HAT (B). 2.13inch e-Paper HAT (C). 2.13inch e-Paper HAT (D). 59.2 × 29.2. 30.704 × 60.088.

37.0 × 83.5. 57.29 × 38.19. 85.0 × 56.0. 2.7inch e-Paper HAT (B).

66.89 × 29.05. 89.5 × 38.0. 2.9inch e-Paper Module (B). 2.9inch e-Paper Module (C). 2.9inch e-Paper HAT (D).

66.90 × 29.06. 79.0 × 36.7. 47.32 × 81.12. 58.0 × 96.5. 84.80 × 63.60.

103.0 × 78.5. 4.2inch e-Paper Module (B).

4.2inch e-Paper Module (C). 4.3inch e-Paper UART Module. 88.00 × 66.00. 118.0 × 75.0. 5.65inch e-Paper Module (F). 114.9 × 85.8.

138.5 × 100.5. 5.83inch e-Paper HAT (B).

119.232 × 88.320. 125.4 × 99.5. 5.83inch e-Paper HAT (C).

118.8 × 88.26. 122.4 × 90.6. 138.4 × 101.8.

163.20 × 97.92. 170.2 × 111.2. 7.5inch HD e-Paper HAT. 163.24 × 97.94.

7.5inch e-Paper HAT (B). 7.5inch HD e-Paper HAT (B). 7.5inch e-Paper HAT (C). 158.18 × 118.64.

173.8 × 127.6. 202.8 × 139.43. 209.66 × 157.25. 216.7 × 174.4. 10.3inch e-Paper HAT (D).

227.7 × 165.8. 252.98 × 190.90. 280.0 × 229.5.

12.48inch e-Paper Module (B). 270.40 × 202.80. 285.80 × 213.65. It usually takes about 0.3s for partial refresh.

Pi Header: standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Actual Weight: 0.187 kg. E-Paper IT8951 Driver HAT x1. 13.3inch e-Paper Adapter x1. 33PIN FFC (same side contact) x1. USB type A plug to micro B plug cable x1. PH2.0 20cm 8Pin x1. RPi screws pack (2pcs) x1. If you want to pay by other way, please contact with us directly. · Your shopping experience is very important to us and our business.

· Any question, you are always welcome to contact with us directly, we will reply you asap. The item "13.3inch e-Paper e-Ink Display HAT For Raspberry Pi 1600×1200 16 Grey Scales" is in sale since Tuesday, November 10, 2020. This item is in the category "Business & Industrial\Electrical Equipment & Supplies\Electronic Components & Semiconductors\LEDs, LCDs & Display Modules\LCD Display Modules".

The seller is "devkits" and is located in . This item can be shipped worldwide.

• Color: Black
• Brand: Waveshare

---